NEC DT820 Series User Manual page 174

5
6
7
10 -154
C A L L H I S T O R Y, A N D T H E C O R P O R AT E A N D P E R S O N A L D I R E C T O R I E S
Call History
Press the Options softkey.
2
Select Directory Add.
Review the information. To change any of the fields in the entry, use the cursor pad or
 
the Up and Down softkeys to scroll to the field, then press the More softkey and
then the Edit softkey to edit that field.
1
Name
Up to 24 characters may be entered for the name.
• Press the Delete softkey to delete the last character entered, or press the
Cancel softkey to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
• To add a space to an entry, press
• To enter special characters, press the
For a list of special characters, see "Speed Dial and Personal Directory
Character Sets" in your phone's User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Fewer than 24 characters may be displayed depending upon the contents of
Note:
the this field since a proportional font is used to display the field.
2
Number
Up to 24 characters may be entered for the number. Only digits, "*" and "#" may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Fewer than 24 characters may be displayed depending upon the contents of
Note:
the this field since a proportional font is used to display the field.
3
Speed Dial
Speed Dial entries can be internal or external numbers.
For more information on Speed Dial Keys, see "Speed Dial and Programmable
Note:
Keys" on page 7 -64.
The number of available Sped Dial Keys and their associated numbers depend on
your model of phone. For more information on the valid Speed Dial Keys for the
specific phone models, see "Speed Dial and Programmable Keys" on page 7 -64.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
4
Monitor
If you have set a Speed Dial for the entry, you can set Monitor settings for the entry.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
*
key on the keypad.
#
.
1
key.
DT820 Phone User Guide