To Set Conditional Handset Forwarding - Busy Using Star Codes; To Clear Handset Forwarding Conditions - NEC DT820 Series User Manual

To s et Con di ti onal Handse t forw arding - B u sy u s ing st ar co des
1
2
To c lear Handse t Forw ar ding Condit ion s
1
2
3
4
5
DT820 Phone User Guide
M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Lift the handset from the phone.
Dial *63+ <forwarding number>.
When your phone is Busy, all other calls will forward to the configured number(s).
Multiple handset forwarding conditions may be enabled for your phone. To enter
additional numbers, hang up the phone and then lift the handset to enter an additional
number (example: *63 + forwarding number, hang up, *63 + another forwarding
number, hang up).
This clears all handset forwarding conditions that are applied to the phoneset.
Note:
You cannot clear only a subset of the forwarding conditions. You would need to
clear all forwarding conditions and then re-enter any specific conditions you
wish to apply.
Press the Feature Key.
Press the Home soft key or wait 2 seconds to connect to the microbrowser home page.
Select Handset Forwarding.
Select Clear forwarding.
This page handles the following events:
Soft Key Features:


Exit
Select
Hard Key Features:
4-way scroll BACK key
(Redial key)
4-way scroll FORWARD key
(Directory key)
4-way scroll UP key
(Volume UP Key)
4-way scroll DOWN key
(Volume DOWN Key)
ENTER key
The phone clears all of the handset forwarding settings that are applied to the phone.
This only clears the handset forwarding settings applied to the phone.
Note:
Administrator configured or system-level forwarding settings are not deleted.
Explanation
Move to previous menu item (does not show if first menu item is
selected).
Move to next menu item (does not show if last menu item is
selected).
Exit the microbrowser to the appropriate call status screen.
Select highlighted menu item.
Return to the previous screen.
No operation.
Remain on existing screen move cursor up.
Remain on existing screen move cursor down.
Exit the microbrowser to the appropriate call status screen
Using the Microbrowser
Explanation
8 -97