To Pickup A Call On A Park Extension; Call Back Key; Using The Call Back Key; To Reset The Number For A Call Back Key - NEC DT820 Series User Manual

To p i cku p a call on a P ark Ex tension
•
Us ing the Cal l Back K ey
•
To r e set the n um ber f or a C all Bac k key
1
2
To c lear Cal l Back
1
2
To M oni tor a Cal l ( Wo rkgro up scenar io)
1
2
DT820 Phone User Guide
M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Your current call is parked at the Park Extension. All users who have a Park
Extension key for that number will be able to see there is a call parked on that
extension.
While your phone is idle and the Park Extension LED is flashing, do one of the following:
• To place a hands-free or headset call: Press the Park Extension key, then use
your headset or the phone's speaker to continue the call on your phone.
• To use your phone handset for the call: Pick up your phone handset, then
press the Park Extension key to pick up the call from that address.
C A L L B A C K K E Y
A Call Back key is used to set call back for the last dialed number. For other users
where you can monitor presence, the key is also set with presence monitoring
information.
Press the Call Back key to set call back to the last dialed number.
If the number can be monitored for presence, the key will show presence information
for the number.
The key stays configured for call back to that number until the number is dialed or call
back is manually cleared. If you attempt to place a new call to another number and
then want to set call back for that number, you must reset the Call Back key.
If you already have a Call Back key configured with a number and want to change the
number that the key is programmed for, you must reset the key.
Press the configured Call Back key.
Press the CB Reset soft key.
Press the Call Back key.
Press the CB Clear soft key.
M O N I T O R / S U P E R V I S E K E Y
If you have Supervise rights over other users, you can listen (monitor) or join (barge)
calls for users you have Supervise rights over.
The workgroup member's LED on your phone will display stead red to show they are
currently on a call.
Press the key for the workgroup member.
Press the Monitor soft key.
Using Enhanced Programmable Keys
8 -111