Basic Operation; Answering Calls; Placing Calls; Speed Dial - Storing Numbers - NEC Univerge SV8100 User Manual

1.
2.

BASIC OPERATION

Answering Calls

R C
INGING ALLS
1. Lift handset.
2. Converse.
O -H S
FF OOK IGNALING
With a call in progress:
1. Receive Off-Hook Signaling.
2. Replace handset to disconnect the present call.
3. Lift the handset to converse with the second call.

Placing Calls

I C
NTERNAL ALLS
1. Lift handset.
2. Dial station number or 0 for the attendant.
When calling a multiline telephone, dialing 1 after
Note 1:
the station number will change ringing to voice or
voice to ringing.
To directly access a personal voice mailbox, dial 8
Note 2:
after dialing the station number.
O C
UTSIDE ALLS
1. Lift handset.
2. Dial trunk access code, i.e. 9.
3. Dial telephone number.
4. Converse.
L CO/PBX N
AST UMBER
1. Lift handset.
2. Dial Last Number Redial code #5.
3. Converse.
Speed Dial – Storing Numbers
1. Lift the Handset.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be
programmed (0~9).
1 = Station Speed Dial Buffer 1
2 = Station Speed Dial Buffer 2
3 = Station Speed Dial Buffer 3
4 = Station Speed Dial Buffer 4
5 = Station Speed Dial Buffer 5
6 = Station Speed Dial Buffer 6
7 = Station Speed Dial Buffer 7
8 = Station Speed Dial Buffer 8
9 = Station Speed Dial Buffer 9
0 = Station Speed Dial Buffer 10
4. Dial the telephone number you want to store (up
to 24 digits).
Valid entries are 0~9,

A Single line set cannot program a pause or

flash in a spd bin.
3
R
EDIAL
and .
#
