American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 36

®
Intellex
36
Enable/Disable Security
Security Setup
Digital Video Management System Installation and Operating Instructions
NOTE: This function is only available to the Administrator. The
Enable (or Disable) button only appears when the
system administrator is logged in.
Use this option to either enable or disable system security. The
unit displays the appropriate button: Enable or Disable. The
security system is disabled as the factory default; you must
initially enable it.
When the Enable button appears, security is disabled. The
system does not require users to log in and lets them access all
functions (except this one).
When the Disable button appears, security is enabled. The
system requires users to log in and restricts them to their
individual privileges.
To enable (or disable) system security:
1. Click Enable (or Disable) from the user list screen. A
confirmation message appears.
2. Select Yes to enable (or disable) system security. The system
displays the Enter PIN Code screen. Select No to close the
message screen without enabling (or disabling) security.
3. Enter the system administrator's four-digit PIN code. The
unit displays asterisks as a security measure. Enter the code
from the Screen Keypad or the Physical Keypad.
Screen Keypad:
a. Use the mouse pointer to click the numeric buttons to
enter the code.
b. Click backspace to erase an entry.
c. Click OK to enable (or disable) system security.
Physical Keypad:
The physical keypad is located on the optional keyboard.
a. Make sure the numeric lock indicator on the keyboard is
lit. If not, press the numeric lock key on the keypad.
b. Press the numeric keys on the keypad to enter the code.
c. Press the Backspace key to erase an entry.
MORE>>>