American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 66

®
Intellex
66
Configuring an Alarmed
Segment
Schedule Setup
Digital Video Management System Installation and Operating Instructions
Use the Alarmed Segment screen to configure the pre-alarm
record quality and duration for the segment as well as the live
filter.
NOTE: You must have purchased the Smart Pack option to use
the Live Filter Configuration
1. Define the segment (see
2. Use one of the following options to display the Alarmed
Segment screen:
Double-click the segment to configure.
Select the segment to configure; then click Setup.
Select the segment to configure; then access the custom
schedule popup menu (see
then select Setup.
Alarmed segment: (camera name) from hh:mm to hh:m m .—
Indicates the camera name and the segment's start and end
times.
Pre-Alarm Quality — Select the record quality for the pre-alarm
images recorded during this segment. The default is Normal.
NOTE: This quality setting only affects pre-alarm images. To set
the record quality of alarm images, refer to
Operations
Super — Record images at the highest image quality. Since
the unit uses the lowest level of compression, this setting
requires the highest amount of storage space.
Normal — Record images at normal image quality. This
setting provides a balance between compression and storage
space requirements.
Extended Record — Record images at the highest level of
compression. This setting requires the lowest amount of
storage space.
Pre-Alarm Sensitivity — This setting lets you control how
Intellex responds to small, subtle changes between images. Select
the sensitivity to use when storing pre-alarm images. The default
is Normal.
High — At this setting, Intellex records the smaller changes
functions.
Working with Schedule
Custom Schedule Popup
later in this chapter.
Segments).
Menu);
Alarm
MORE>>>