American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 122

®
Intellex
122
Search Filter
Configuration
Light Change
Motion Detection
Perimeter Violation
Image Database Search
Digital Video Management System Installation and Operating Instructions
Set search filters to select video segments for playback based on a
user-defined target area and type of activity. The method for
defining the search target area is identical to defining live filter
target areas. See
instructions.
NOTE: Before following any procedures in this section, select the
search filter and click Setup (see
Use the Light Change screen to configure the target area for the
light change filter. Once configured, the filter selects video
segments with light level changes. The light level can change
when someone turns lights on or off, uses a flashlight or blocks
the camera lens. See
definition and sensitivity settings.
NOTE: You can only configure one light change target search
area at a time.
Use the Motion Detection screen to configure the target area for
the motion detection filter. Once configured, the filter selects
video segments with movement in the target area. See
Detection for details on target area definition and sensitivity
settings.
NOTE: You can configure one or more motion detection target
search areas at a time.
Use the Perimeter Violation screen to configure the target area for
the perimeter violation filter. Once configured, the filter selects
video segments with objects crossing into or out of the target
area. See Perimeter Protection
and sensitivity settings.
NOTE: You can only configure one perimeter violation target
search area at a time.
Motion Detection for target area definition
Light Change for details on target area
for details on target area definition
Filters Search ).
Motion
MORE>>>