American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 105

®
Intellex Digital Video Management System Installation and Operating Instructions
Playback Controls and
Indicators
Playback Screen
Use the mouse pointer and the following on-screen controls to
play back images:
8. Record — This indicator is lit when the unit is recording
images. On the front panel, this indicator is labeled REC.
9. Play — This indicator is lit when the unit is playing back
images. Play changes to Pause when playback is paused.
10. 1–8 (Cameras) — Click to play back images for specific
cameras. The camera button text changes from white to
yellow to indicate which camera is being played back. The
message No Video appears on the screen if no images have
been recorded for the selected camera.
11. Play/Pause knob or VCR Control — Controls the playback
speed and direction (see
displays the playback speed (1x to 5x) and direction (forward
or reverse).
VCR Control — You can control play/pause as well as
playback direction and speed by clicking each of the icons on
the on-screen control. The center icon selects pause mode,
controls to the right are forward play then fast play, the
controls to the left are reverse play and fast reverse play. If in
pause mode, play or reverse play will display image by
image.
12. Alarms — Click to display the alarm review screen.
13. Screen Formats — Click to change the live display format.
If in playback mode, the unit changes the live display format,
but does not exit playback. If an optional live monitor is
installed, the new format appears immediately.
14. Status — Click to display the status screen (see
Unit Status).
15. Seq (Sequence) — Click to display cameras sequentially
Using the Playback Screen). The unit
105
Reviewing
MORE>>>