American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 52

®
Intellex
52
Single Camera Setup
Single Camera Setup Screen
Schedule Setup
Digital Video Management System Installation and Operating Instructions
Use the Single Camera Setup screens to record images from a
single camera at a specific rate and quality. Select the Use Single
Camera Schedule option. The unit displays the Single Camera
tab and removes all other tabs.
Single Camera — Click to display the Single Camera screen.
Select another Single Camera Schedule Setup Option for
configuration. Otherwise, click OK to accept the new displayed
schedule, as well as any changes on the other Single Camera
Schedule Setup screens, and return to the Setup Options screen.
Click Cancel to cancel the changes and return to the Setup
Options screen.
Use the Single Camera screen to select the camera, rate and
quality for single camera operation.
Camera — Select the camera to record during single camera
operation. The first camera is selected by default.
1. Click down arrow. A list of cameras appears.
2. Click the desired camera.
Rate — Select the record rate in ips (images per second) for
single camera operation. The actual record rate is affected by
motion and other factors. The default is 30 ips (25 ips PAL).
1. Click down arrow. A list of record rates appears.
2. Click the record rate.
Quality — Select the record quality to use when recording this
camera. The default setting is Normal.
Super — Record images at the highest image quality. Since
the unit uses the lowest level of compression, this setting
requires the highest amount of storage space.
Normal — Record images at normal image quality. This
setting provides a balance between compression and storage
space requirements.
MORE>>>