American Dynamics Intellex DV8000 Installation And Operating Instructions Manual page 13

®
Intellex Digital Video Management System Installation and Operating Instructions
INSTALLING THE
INTELLEX UNIT
Required Connections
Cameras In
Monitor
Power Setting
Power In
Mouse
Installing the Intellex Unit
Select a location for the unit that is clean and dry and where
temperature and humidity extremes do not exceed the product
specifications (see Technical
result in equipment failure and loss of warranty protection.
Make sure the location has stable AC power for the unit. Protect
the unit against severe power fluctuations by installing surge
protection devices on all power cables.
CAUTION: Protect the unit against lightning. If a portion of a
cable is installed outside of a building, the entire
cable is vulnerable to lightning. Therefore, install
surge protection devices on all vulnerable cables.
CAUTION: If you set the termination switch at 75 ohms, you
MUST select "Hi-Z" in the Intellex Setup Options
screen. If you select "75 ohms" in the Intellex Setup
Options screen, you MUST use the "infinity" symbol
setting on the termination switch (consult System
Setup, Setup Options Screen ).
Connect the video output of each camera or other composite
video source to its corresponding Camera In connector.
The monitor displays live and recorded cameras, as well as
system configuration and status information. Connect the VGA
cable from an SVGA monitor to the Monitor connector.
CAUTION: Before connecting power, set the voltage switch
to the correct voltage ("115" or "230").
Switch the power supply to the correct input voltage setting: 115
or 230 volts.
CAUTION: You may want to install power line conditioning
equipment to protect the unit against severe power
fluctuations.
CAUTION: Do not apply power until you have connected all
optional items. The Intellex unit will start operating
immediately once power is applied.
Connect the power cable to the unit.
Connect the mouse (or other pointing device) to the Mouse
connector.
Specifications). Failure to do so can
13
MORE>>>