Regional Settings - American Dynamics Intellex DV8000 Installation And Operating Instructions Manual

®
Intellex
18
REGIONAL
SETTINGS

Regional Settings

Digital Video Management System Installation and Operating Instructions
You must configure the unit to display dates and times in the
format appropriate to your language and country or region.
To configure the regional settings:
NOTE: Do NOT change any other regional settings or you may
affect unit operation.
1. From the Control Panel screen, double-click the Regional
Settings icon. The Regional Settings Properties screen
appears.
2. Click down arrow to display a list of languages, including
countries and regions.
Since the list is too long for the display area, a scroll bar
appears along the right side, with arrows at the top and
bottom and a slide button between.
Use the scroll bar to display languages, countries and regions
that are hidden. Click up arrow or down arrow or drag the
scroll button up or down.
3. When you locate the correct language, including country and
region, select it. The list disappears and the language name is
displayed in the box.
4. Select Cancel to close this screen without changing the
regional settings and return to the Control Panel screen.
Select OK to accept the new regional settings, close this
screen and return to the Control Panel screen.
MORE>>>