Eizo DuraVision FDF4627W-IP Installation Manual page 67

Software Update
You can both upgrade or downgrade the software version.
1. In "System", select "Maintenance".
The screen transitions to "Software Update".
2. Select "Browse".
A file selection dialog box opens. Select the applicable file.
Attention
• The software will not be updated if a file is not selected, or a file other than an update file has been
selected.
• Perform software updates with the monitor screen displayed.
3. Select "Execute".
4. The following message appears.
Select "OK".
5. The update process starts, and the following message appears.
Select "OK".
6. The software is updated.
Close the web browser, and wait 5 minutes before accessing again.
Note
• You can select update files from the File Selection screen, and can perform upgrading or downgrading of
software.
• When you restart your system, a message indicating the success or failure of the software update will
appear. The message will clear automatically after 60 seconds if "OK" is not selected. However, this
message will not appear if you do the update through your web browser.
Chapter 3 Configuring from a Web Browser
67