Eizo DuraVision FDF4627W-IP Installation Manual page 28

Network
Set network information.
1. Select "Network Settings", "DNS Settings" or "NTP Settings".
2. Configure the items.
Item
Network Settings
DNS Settings
NTP Settings
*1 If your network environment does not include a gateway, you do not need to set the "Gateway"
address. Use the default setting as is, or set as "0.0.0.0".
3. Select "Apply".
The setting complete screen is displayed. Select "OK".
28
Chapter 2 Configuring from the monitor screen
2
2
2
3
Detail
Select the IP address setting method.
If "Manual Setting" is selected, set the IP
address, subnet mask and gateway.
Set the DNS.
(When "IP Address" of "Network Settings" is set
to "Manual Setting".)
If you selected "Manual", set the primary server
address and the secondary server address.
Set whether or not to use an NTP server.
If you selected "On", set the NTP server
address.
1
1
1
Setting range
IP Setting Method DHCP / Manual
Setting
IP Address, 0.0.0.0 to
Subnet Mask, 255.255.255.255
Gateway *1
DNS Auto / Manual
Primary Server 0.0.0.0 to
Address, 255.255.255.255
Secondary Server
Address
NTP On / Off
Server Address Alphanumeric
characters and
symbols