Eizo DuraVision FDF4627W-IP Installation Manual page 20

When using an AXIS network camera
1. Configure the items.
Item
Video Stream
Stream Profile
Compression Format
Resolution
Frame Rate
*1
Rotation
GOP Length
Bit Rate (Max.)
Priority
Transmission Mode
Multicast Address*
Multicast Port*
Multicast TTL*
*1 For details on rotation settings, refer to the network camera user's manual.
*2 Displays when "Transmission Mode," or "Multicast" is selected.
2. Select "Apply".
The setting complete screen is displayed. Select "OK".
Attention
• To display the multicast stream of AXIS network cameras, configure multicast on the camera.
20
Chapter 2 Configuring from the monitor screen
1
2
Select the display mode for screens that display
network camera images.
Select the profile that the network camera has.
Select the compression format.
Set the resolution of H.264 images.
Set the frame rate (image update interval) of
H.264 images.
Show the rotational direction of the network
camera image.
Set the GOP length for video.
Set the maximum H.264 image bit rate.
Set the preference for video compression.
Select the transmission method for AXIS
camera images.
2
Show the multicast address for multicast
transmission of H.264 images.
2
Show the multicast port number for multicast
transmission of H.264 images.
2
Show the network TTL value for multicast
transmission of H.264 images.
Detail Setting range
According to the camera
specification
According to the camera
specification
H.264 (Fixed)
According to the camera
specification
According to the camera
specification (Maximum possible
values 30fps)
According to the camera
specification
I-frame Interval
(only when H.264 is selected)
According to the camera
specification (Maximum possible
values 8192 kbps)
None / Frame Rate / Quality
Unicast / Multicast
224.0.0.0 to 239.255.255.255
1824 to 65534 even numbers
only
According to the camera
specification