Eizo DuraVision FDF4627W-IP Installation Manual page 18

Camera Information Display
Select to display or not display the camera information and time of the network camera settings on
the camera images.
Attention
• It is not possible to configure the network camera when its "Protocol" is set to "ONVIF","AXIS", or "DirectUri".
1. Configure the items.
Item
Camera Information Display Set whether or not to display camera information. On / Off
Time Display
Display Position
2. Select "Apply".
The setting complete screen is displayed. Select "OK".
Clock Settings
1. Synchronizes the time of the network camera with the time of the monitor.
Select "Execute" to synchronize the clock.
Video Settings
Set the Image Quality of transmitted images for the network camera.
Note
• This product supports H.264 and MJPEG (ONVIF only) video compression formats.
Attention
• When devices such as recorders are connected to a network camera, the display and recording of such
devices may be affected.
• It is not possible to configure the network camera when its "Protocol" is set to "DirectUri".
18
Chapter 2 Configuring from the monitor screen
1
2
Set whether or not to display the time.
Set the display position of the camera information
and time.
Detail Setting range
12h / 24h / Off
Upper Left / Upper Right /
Lower Left / Lower Right