Eizo DuraVision FDF4627W-IP Installation Manual page 19

Hide thumbs Also See for DuraVision FDF4627W-IP:
Table of Contents

Advertisement

When using a Panasonic network camera
1. Configure the items.
Item
Aspect Ratio
Resolution
Refresh Interval
Transmission Priority Set the transmission mode of H.264
Frame Rate
Bit Rate (Max.)
Bit Rate (Min.)
Image Quality
*1 When "1920" is selected for "Resolution", the aspect ratio is fixed to 16:9. The aspect ratio cannot be
set when the network camera "Stream" is set to a value other than "1".
*2 For H.264 images, the differential data between the full screen frame data and previous frame are
sent periodically. "Refresh Interval" refers to the interval for sending these full screen frame data.
Shortening this interval improves the stability of image quality but also increases the load on the
network. "Refresh Interval" refers to the interval at which the full screen data is transmitted. Shortening
this interval improves the image quality but also increases the load on the network.
*3 The shorter the interval, the shorter the update interval and the smoother the display, but also the larger
the load on the network.
2. Select "Apply".
The setting complete screen is displayed. Select "OK".
Attention
• To display the multicast stream of Panasonic network cameras, configure multicast on the camera.
• When you change the "Aspect Ratio," the network camera imaging mode will change. Depending on the
imaging mode, the image quality of other recording devices or display devices may be impacted. Check the
impact of changes to the imaging mode before configuring the settings.
1
2
Detail
Set the H.264 aspect ratio.
Set the H.264 resolution.
*2
Set the refresh interval
of H.264 images.
images.
(When the mode is set to "Frame Rate" at
"Transmission Priority".)
Set the frame rate (image update interval)
*3
of H.264 images.
Set the maximum H.264 image bit rate.
(When the mode is set to "Best Effort" for
"Transmission Priority".)
Set the minimum H.264 image bit rate.
(When the mode is set to "Constant Bit
Rate" or "Best Effort" for "Transmission
Priority".)
Set the H.264 image quality.
*1
Network camera imaging mode
According to the network camera
specification
0.2s / 0.33s / 0.5s / 1s / 2s / 3s / 4s / 5s
Constant Bit Rate / Frame Rate / Best
Effort
1fps / 3fps / 5fps / 7.5fps / 10fps / 12fps /
15fps / 20fps / 30fps
64kbps / 128kbps / 256kbps / 384kbps /
512kbps / 768kbps / 1024kbps /
1536kbps / 2048kbps / 3072kbps /
4096kbps / 8192kbps
64kbps / 128kbps / 256kbps / 384kbps /
512kbps / 768kbps / 1024kbps /
1536kbps / 2048kbps / 3072kbps /
4096kbps / 8192kbps
Low (prioritize motion) / Normal / Fine
(prioritize image quality)
Chapter 2 Configuring from the monitor screen
Setting range
19

Advertisement

Table of Contents
loading

Table of Contents