Eizo DuraVision FDF4627W-IP Installation Manual page 51

3. Select "Manual Registration".
A "Camera Information Settings" dialog box appears. When a registered camera is selected, a dialog box
describing the applicable camera information appears.
Item
Camera Name
IP Address
Port
Protocol
*2
Username
*2
Password
*3
Stream
Channel *3
RS485 PTZ Control *3
Video Stream *4
Detail
Enter the camera name. When "Obtain Camera
Name" is selected, the camera name is
automatically obtained from the network camera.
• Panasonic network camera: Camera Name
• AXIS network camera: Camera Name
• Network camera with its "Protocol" set to
"ONVIF": Camera model number, manufacturer
name, etc.
Enter the network camera IP address.
Enter the network camera port number.
Select the protocol for controlling the camera.
Enter the username to use when accessing
network cameras.
Enter the password to use when accessing
network cameras.
Select a stream for delivering camera images.
Select a stream supported by the connected
network camera.
Select the channel of the analog encoder. If the
network camera does not support the channel
function, set to "1".
Controls the brightness, automatic focus
adjustment, pan, tilt and zoom for devices that are
connected to the network camera via a RS485
cable.
Select the display mode for screens that
display the network camera images. When
"Obtain Stream" is selected, the display mode is
automatically selected from the network camera.
Alphanumerics, kana, and
kanji (24 characters max.)
0.0.0.0 to 255.255.255.255
1 to 65535
Panasonic / AXIS / ONVIF /
DirectUri
Alphanumeric, symbols
(up to 32 characters)
Alphanumeric, symbols
(up to 32 characters)
CH1 to CH4
CH1 to CH4
On / Off
According to the camera
specification
Chapter 3 Configuring from a Web Browser
Setting range
*1
51