Emerson Rosemount OCX 8800 Reference Manual page 235

Prerequisites
The O2 cell and heater strut assembly (9,
must be removed before you start this procedure.
Procedure
1.
2.
Reference Manual
Use a straightedge to matchmark alignment of the eductor flat and elbow, as shown
in Figure 9-10.
Figure 9-10: Eductor alignment matchmarks
A. Eductor flat
B. Straight edge
C. Matchmark
Unscrew the terminal block mounting (13,
mounting away from the eductor (6).
Figure 9-5) and the COe assembly (5,
Figure 9-8). Move the terminal block
Maintenance and service
Figure 9-8)
225