Emerson Rosemount OCX 8800 Reference Manual page 225

5.
6.
7.
8.
9.
Reference Manual
Figure 9-4: Sensor housing terminals
Note
Wire colors shown are for cables provided by Emerson.
Disconnect the signal cable from the O
and CJC terminal blocks.
Disconnect the heater power cable from the HTR terminal blocks.
If moving the sensor housing to another work site, disconnect and remove the
power and signal cables from the sensor housing.
Remove insulation to access the mounting bolts. Unbolt the sensor housing from
the stack and take it to a clean work area.
Allow the sensor housing to cool to a comfortable working temperature.
and T/C terminal blocks and from the CO
2
Maintenance and service
215