REAR DRIVE (CV) SHAFT
Inspection
Check the front and rear driveshaft CV boots for any
tears or leaking grease. If the driveshaft boot loses all
grease, CV joint failure will occur.
Removal
1. Remove rear hub. Refer to "REAR HUB REMOVAL"
2. Remove upper carrier bolt. Tip hub outward and
3. Pull
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
in this chapter.
remove shaft from carrier.
sharply
outward
to
transmission. Install a new compression ring and
apply an anti-sieze compound to the splines upon
assembly.
FINAL DRIVE
remove
shaft
from
7
7.55