EBS DRIVE CLUTCH SERVICE (6X6)
EBS Drive Clutch Exploded View (6x6)
Drive Clutch Disassembly
1. Using a permanent marker, mark the cover, spider,
and moveable and stationary sheaves for reference,
as the cast-in X's may not have been in alignment
before disassembly.
2. Remove cover bolts evenly in a cross pattern and
remove cover plate.
3. Inspect cover bushing (A). The outer cover bushing
4. Inspect area on shaft where bushing rides for wear,
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
is manufactured with a Teflon coating. Wear is
determined by the amount of Teflon remaining on the
bushing.
Cover Bushing Inspection:
Replace the cover bushing if more
brass than Teflon® is visible on
the bushing. Refer to bushing
replacement in this chapter.
galling, nicks, or scratches. Replace clutch assembly
if worn or damaged.
CLUTCHING
6
6.23