Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 361

11. Install all new seals into the gearcases. Use the Rear
Output Seal Driver (PN 2871698) and Rear
Driveshaft Seal Guide (PN 2871699) to install the
seals into the gearcase halves (refer to the following
illustration to identify
replacement).
12. Thoroughly clean the shift shaft housing. Be sure
the seals needing
13. Install the sector gear (16T) onto the shift drum shaft.
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
TRANSMISSION
the transmission is in
reassembly.
Install the shift shaft assembly and sector gear (11T)
into the bushing pocket on the left side. Align the
timing marks on the gears as shown.
Reverse prior to
8
8.21