Polaris Sportsman 800 EFI 4x4 2012 Service Manual page 296

FINAL DRIVE
13. Inspect the magnetic coil (1) in the outer cover plate
assembly. Inspect the backlash pad (2) for excessive
wear.
NOTE: See "FRONT GEARCASE DIAGNOSIS" in
this chapter.
Ring gear backlash (2) is set at the factory. No
adjustment is required, unless the front cover is
replaced or the back lash pad screw is removed.
See the "FRONT GEARCASE ASSEMBLY" in this
chapter for details on backlash setting.
14. Remove the bolts retaining the input shaft cover and
pinion gear assembly.
7.30
15. Inspect the magnetic coil (1) and bushing in the input
cover plate assembly. Replace the input cover seal.
16. Remove the splined armature plate (1).
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.