Chapter 9
Audible Alarms and UPS Conditions
Load Segment 2 Indicator (green)
Load Segment 1 Indicator (yellow)
On Battery Indicator (yellow)
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Site wiring fault on 120V models
S
Service and support
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 9 to determine and resolve the UPS alarms and
conditions.
Service Indicator (red)
Overload Indicator (red)
Figure 29. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 9). To silence the
alarm for an existing fault, press the
the alarm beeps, overriding the previous alarm silencing.
Power On Indicator (green)
On/Off Button
Test/Alarm Reset Button
button. If UPS status changes,
S
Indicator Legend
Unlit
Lit
Flashing
55
164201663 Rev 1