Table of Contents
Advertisement
INSTALLATION
Zero-U Mounting
To install the UPS in a zero-U rack configuration using the supplied
hardware:
1.
2.
3.
4.
30
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
Attach four mounting brackets to the UPS as shown in Figure 13.
Secure the short end of the mounting bracket to the UPS using two
×
of the supplied M3
6 screws.
Adjust the sides of the rack to fit the UPS and brackets (within
56.35–56.95 cm or 22.54–22.78").
Secure the UPS to the side of the rack cabinet using one M6
screw and one clip nut in each mounting bracket.
×
10
S
164201663 Rev 1
Advertisement
Table of Contents
