Table of Contents
Advertisement
INSTALLATION
Wall-Mount Setup
To mount the UPS to a wall using the supplied hardware:
1.
2.
The UPS MUST be positioned with the front cover at the top to prevent a battery hazard.
3.
Wall
32
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
Attach four mounting brackets to the UPS as shown in Figure 14.
Secure the short end of the mounting bracket to the UPS using two
×
of the supplied M3
6 screws.
W A R N I N G
Secure the UPS to the wall using one bolt in each mounting bracket
as shown. Select the bolt according to the wall type.
Figure 14. Mounting the UPS to a Wall
S
164201663 Rev 1
Advertisement
Table of Contents
