Table of Contents
Advertisement
UPS MAINTENANCE
Testing New Batteries
NOTE The batteries must be fully charged and the UPS must not be in Battery mode to
perform the self-test.
Press and hold the
The 15-second test automatically distributes the load to the batteries
and tests the battery's performance. While the test is in progress, the
indicators cycle through and the alarm sounds. When complete, the UPS
returns to Normal mode as indicated by the
If there is a problem with the battery, the alarm beeps, the
illuminates and the
and be sure the battery is fully charged. Call your Avaya service
representative if the problem persists.
Recycling the Used Battery or UPS
Contact your local recycling or hazardous waste center for information
on proper disposal of the used battery or UPS.
S
S
Do not discard the UPS or the UPS batteries in the trash. This product contains sealed,
lead-acid batteries and must be disposed of properly. For more information, contact your
local recycling/reuse or hazardous waste center.
Do not discard waste electrical or electronic equipment (WEEE) in the trash. For proper
disposal, contact your local recycling/reuse or hazardous waste center.
50
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
button for three seconds to initiate a self-test.
indicator flashes. Check the battery connections
Do not dispose of the battery or batteries in a fire. Batteries may explode. Proper
disposal of batteries is required. Refer to your local codes for disposal requirements.
Do not open or mutilate the battery or batteries. Released electrolyte is harmful to the
skin and eyes. It may be toxic.
μ
and Load indicators.
W A R N I N G
C A U T I O N
C A U T I O N
S
164201663 Rev 1
+ ---
indicator
Advertisement
Table of Contents
