Turning The Ups Off; Standby Mode - Avaya PW5115 500 RM Site Preparation, Installation And Operator's Manual

OPERATION

Turning the UPS Off

NOTE Pressing the
down immediately.
To turn off the UPS:
1.
2.
3.

Standby Mode

When the UPS is turned off and remains plugged into a power outlet,
the UPS is in Standby mode. All indicators are off and power is not
available to your equipment. The battery recharges when necessary.
NOTE For 220–240V models, the output receptacles may remain electrically live (up to
110–120V). Unplug the UPS to ensure power is not available to the output receptacles.
36 t
Avaya Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
button while the UPS is in Battery mode causes the UPS to shut
Prepare your equipment for shutdown.
Press and hold the button until the long beep ceases
(approximately two seconds).
Unplug the UPS from the power outlet.
If you do not unplug the UPS, it remains in Standby mode.
S
164201663 Rev 1