Table of Contents
Advertisement
Chapter 3
Inspecting the Equipment
Connecting the UPS Internal Battery
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
Installation
This section explains:
S
Equipment inspection
S
UPS internal battery connection
S
UPS setup and installation
S
UPS rear panels
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and
immediately notify your Avaya service representative.
NOTE Check the battery recharge date on the shipping carton label. If the date has expired
and the batteries were never recharged, do not use the UPS. Contact your Avaya service
representative.
To ensure proper battery operation:
1.
Verify that the UPS is off and unplugged.
2.
Pull the right side of the UPS front cover to release the snaps at the
right and middle of the cover (see Figure 2). Remove the UPS front
cover from the left side.
Figure 2. Removing the UPS Front Cover
S
164201663 Rev 1
23
Advertisement
Table of Contents
