Siemens 353 User Manual page 21

UM353-1B
DESCRIPTION
Resistor, 250Ω, 0.1%, 3W, WW
Sleeving
Crimp-On Connector
Kit Installation Instruction
Shunt (Not used in Design Level B
controller)
4. Mounting Clip Kit, no part number, qty. 1. Kit contains 2, Mounting Clips and 2, 8-32 x 1 Screws (see the Parts
List at back of this manual for part numbers)
5. I/O Expander Board Kits
PN16353-52 I/O Expander Board Kit - The I/O Expander Board is factory installed when a Siemens 353 with
Expansion Board option 1 is ordered.
•
For field installation of this kit, see the supplied Kit Installation Instruction (15900-390).
DESCRIPTION
I/O Expander Board - Do not remove Board from static shielding
bag until it is to be installed.
Range Resistor and Reference Junction Kit, see below
PN16353-49 Range Resistor and Reference Junction Kit - This kit is supplied with the above I/O Expander
Board Kit and with a factory shipped Siemens 353 with Expansion Board option 1.
DESCRIPTION
4-20 mA to 1-5V Range Resistor, 250Ω, 0.1%, 3W, WW
4-20 mA to 15-75 mV Range Resistor, 3.75Ω, 0.1%, 3W, WW
Sleeving
Crimp-On Connector
TC Reference Junction, 100Ω
Kit Installation Instruction
6. Process Instrumentation User Manual CD ROM, qty. 1
7. Installation Guide IG353-1
8. Two warning labels that are to be placed in a highly visible location near the case rear terminals.
9. Additional items as required by your order. Refer to the packing list accompanying a shipment.
April 2012
QUANTITY
3
3
6
1
1
QUANTITY
1
1
QUANTITY
1
2
5
6
2
1
Introduction
1-9