Nortel Communication Server 1000E Maintenance Manual page 177

LD 117 Print voice-quality metric thresholds
Table 42
LD 117 Print voice-quality metric thresholds
Command
PRT QSTHS
LD 117 Configure voice-quality sampling (polling)
To configure the sampling (polling) period, zone alarm-rate collection
window, and the minimum number of samples to collect during the window,
see
177).
To configure voice-quality sampling using Element Manager, select IP
Network > QoS Thresholds from the System menu of the Element
Manager navigator bar.
Table 43
LD 117 Configure voice-quality sampling (polling)
Command
CHG SQOS <SamplePeriod><SampleRateWindow><MinSampleCnt>
LD 117 Configure zone alarm-notification levels
Systems that process a large number of calls potentially generate a
significant number of SNMP alarms. Controlling the number of alarms
by configuring zone alarm-notification levels helps isolate voice-quality
problems and reduce network traffic.
Voice-quality threshold alarms are examined for their severity relative to
the alarm-notification level settings. If the voice-quality threshold alarm
severity exceeds the configured notification level, it generates an SNMP
alarm. Otherwise it is suppressed.
You can configure Voice-quality threshold alarm-notification levels by zone
so that some bandwidth zones can be monitored for all alarms and other
zones report only serious voice-quality problems. Alarm-notification levels
are defined in
(page
Description
Print all voice-quality thresholds
Table 43 "LD 117 Configure voice-quality sampling (polling)" (page
Description
Change voice-quality sampling parameters
Where:
<SamplePeriod> = 5-(30)-60
<SampleRateWindow> = 60-(300)-3600 seconds
<MinSampleCnt> = 50-(100)-1000
Table 44 "Voice-quality threshold alarm-notification levels"
178).
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
Feature implementation 177