Circuit Card Features; Ntdw53 Common Processor Dual Core Card - Nortel Communication Server 1000E Maintenance Manual

From PDT1 or PDT2, issue the format command as follows: formatCf2
{0,1}.
where
0 = a nonbootable device
1 = a bootable device
You can format a compact flash on a PC (Microsoft Windows 98SE,
Microsoft Windows 2000, or Microsoft Windows XP) for use as a compact
flash in the RMD. You format the disk in FAT16 - DOS format.

Circuit card features

Circuit card features describes various circuit cards and features.
Self-tests
A self-test checks to see that a card is working correctly. Many cards
perform a self-test on power-up. The software commands Disable and
Enable force a card to self-test. The results of a self-test generally show
whether or not there is a problem with the card.

NTDW53 Common Processor Dual Core card

The NTDW53 Common Processor Dual Core (CP DC) card includes the
following components and features:
•
AMD Athlon 64 X2 1.8 Ghz dual core processor
•
2 GB DDR2 RAM
•
160 GB SATA hard drive
•
Three faceplate USB 2.0 ports for software installations, upgrades,
patching, and USB keyboard and mouse support
•
One faceplate VGA port for monitor support
•
Two faceplate Gigabit Ethernet ports
•
Faceplate status LED and card reset buttons
For more information about the CP DC card hardware, see Circuit Card
Reference (NN43001-311).
You can use a USB 2.0 storage device to install or upgrade the Linux
Base Operating System. The CP DC card does not support Compact
Flash (CF) cards.
The CP DC Call Processor connects to the MG 1000E Media Gateway
Controllers through Ethernet and therefore does not require backplane
connectivity (other than power and a slot ID). The following rules apply to
the preferential placement of the CP DC Call Processor in the MG 1000E:
Nortel Communication Server 1000
Communication Server 1000E Maintenance
NN43041-700 04.01 4 June 2010
Copyright © 2004-2010 Nortel Networks. All Rights Reserved.
Circuit card features 33