Appendix
Location and Function of Parts and
Controls
Compact Processor
Main unit (front)
6
1 2
3
4
86
Appendix
1 POWER lamp (green)
When you set the POWER switch to
on, this lamp lights up. This lamp goes
off when the system is on standby, or
flashes when the system is in sleep
mode.
2 STANDBY lamp (orange)
This lamp lights up when the system
is on standby. This lamp goes off
when the system is in sleep mode.
3 IR (Infrared) sensor
Detects the infrared video signal
emitted from the equipment (this is
soon-to-be-available). The infrared
video input via this sensor is assigned
as OBJECT.
4 Remote sensor
When operating the Compact
Processor with the Remote
Commander, point it toward this
sensor.
If you use this sensor, set IR
RECEIVER to Body in the Other
Setup (System Configuration Index 3/
5
3) menu. This is set to Main Camera at
factory.
5 Microphone
6 CAMERA connector
Connect to the camera.
87
Appendix