Starting A Point To Multi-Point Meeting; Calling Remote Parties - Sony PCS-1500 Service Manual

Preparing a Point to Multi-Point Meeting
NUMBER OF LINES
2B: Connects via 2B-channel.
1B: Connects via 1B-channel.
ISDN RATE
AUTO: Connects to a remote party
with a normal ISDN line.
56K: Connects to a region or country
with the 56 Kbps ISDN transfer
rate.
AUDIO MODE
G.711: When not using G.722 and
G.728.
G.722: The audio bandwidth is
wider for better sound quality.
(7 kHz)
G.728: The audio bandwidth is
narrow but the image quality is
better. (3.4 kHz)
Notes
• The settings in the MCU SETUP
menu are only available when the
MCU MODE is set to ON.
• If the terminal that is not adequate
for the setting in the MCU SETUP
menu is connected, see "Notes on
Secondary Terminals " on page 25.
18
Starting a Point to Multi-Point
Meeting
3
You can hold a point to multi-point
meeting among four terminals
(including this terminal). You can add
one normal audio phone in the
network.
Note
Before you start a meeting verify that
MCU MODE is set to ON in the MCU
SETUP menu.
For details on registration on the Dial
4
List menu, operation of the Manual
Dial menu, and receiving calls, refer
to the operating instructions supplied
with the Compact Conference
Note
Package.
When connecting to the remote party
that is set to be connected via 3B-
channel or more, the system only dials

Calling Remote Parties

the number in the A1 box, or the ones
in the A1 and A2 boxes.
To call registered remote
parties To call unregistered remote
parties
1
Press the LIST button, the START
1
( ) button, or the joy stick on the
Remote Commander.
The Dial List menu appears on the
monitor screen.
Dial List 1/7
ABC -- Atlanta branch BRI
Boston branch Bonding
Buffalo branch Speech
Chicago branch V. 35
Cleveland branch BRI
Dallas branch BRI
Denver branch BRI
SELECT: Dial? Yes: No: CANCEL
2
Select a index title (the first
remote party) with the joy stick on
the Remote Commander.
Press the DIAL ( ) button on the
Remote Commander.
The system dials the selected
remote party in step 2, and the
indication "Dialing" appears on
the monitor screen.
When the connection is
completed, the indication
"MEETING STARTS!" appears
on the monitor screen.
Repeat steps 1 to 3 to connect
with the second and third parties.
Press the DIAL ( ) button or one
of the number buttons (0 – 9) on
the Remote Commander.
The Manual Dial menu appears on
the monitor screen.
Manual Dial BRI
A1
A2
B1
B2
C1
C2
NUMBER OF LINES 6
SELECT: Dial? Yes: No: CANCEL
19