Sony PCS-1 Installation

Sony PCS-1 Installation
NOTE: Requires special adapter cable - XLR Female to 3.5 mm mini connector.
Step 1
1.
Plug the red RCA connector on one end of Cable C into Sony video-station <Audio Out> (not MIXED), and then
plug the red RCA connector on the other end into the Fusion Base Station <Conf In>.
2.
Plug one XLR connector of Cable D, XLR to XLR, into XLR Female to 3.5mm adapter cable and then to the Sony
video-station <Mic 1 Input> and the other XLR connector into the Fusion Base Station Mic Level Output <XLR>.
To configure the Sony PCS-1:
:
Select the Audio settings drop down menu.
Confirm or modify the following settings:
•
Input Select - MIC
•
MIC Select – MIC
•
Echo Canceller - OFF
•
CTE – OFF
Press SAVE to save changes.
Sony PCS-G50 or G70 Installation
NOTE: Requires special adapter cable - XLR Female to 3.5 mm mini connector.
Step 1
3.
Plug the red RCA connector on one end of Cable C into Sony video-station <Audio Out 1>, and then plug the red
RCA connector on the other end into the Fusion Base Station <Conf In>.
4.
Plug one XLR connector of Cable D, XLR to XLR, into XLR Female to 3.5mm adapter cable and then to the Sony
video-station <Mic 1 Input> and the other XLR connector into the Fusion Base Station Mic Level Output <XLR>.
Step 2
Step 2