Table of Contents
Advertisement
Location and Function of Parts and Controls
The Rollabout Processor
Front
1 6 Memory card eject button
1 6 Memory card eject button
Press to eject a memory card.
2 STANDBY lamp (orange)
When you press the POWER switch
flashes until the Rollabout Processor goes into
standby. Once in standby, the lamp stays on.
3 POWER lamp (green)
This lamp lights up when the system is turned on.
Pressing the POWER switch
Processor does not turn the system on.
4 BUSY lamp (yellow)
This lamp lights up when the system records onto a
PCS-MC10 Memory Card.
Do not press the 6 memory card eject button when
this lamp is on.
6
Rollabout Processor (Front)
6
, this lamp
6
of the Rollabout
2 STANDBY lamp
3 POWER lamp
BUSY
4 BUSY lamp
5 Memory card slot
6 POWER switch
5 Memory card slot
A PCS-MC10 Memory Card (not supplied) is inserted
into this slot.
6 POWER switch
Turn on this switch to switch the Rollabout Processor
to standby; then use the Remote Commander or
external microphone kit to turn on the processor.
Normal operation requires the unit to be left in standby
at all times. Use one of the menus to put the unit back
into standby.
The STANDBY lamp comes on when the Rollabout
Processor is in standby.
A-1
Appendix
Advertisement
Table of Contents
