Turning Power On/Off - Samsung Galaxy Feel2 Instruction Manual

Charging with USB cable A to C
You can charge the terminal with a PC by connecting it to a PC using a
USB cable A to C 01 (sold separately).
• For connecting to a PC, refer to "Connecting with USB cable A to C"
(P.132).
• When you perform USB connection with a PC, pop-up screen may appear
on the PC. If you just want to charge the terminal without synchronizing
to the PC, select " キャンセル (Cancel)".
• Depending on the terminal condition, it may take time for charging, or
may not be charged.
When the battery is almost exhausted
Notification tone sounds, a message prompting to charge appears and
the display dims. When the battery is exhausted, the power of the terminal
automatically turns off. Depending on the function or app, a message
indicating low battery may appear when you try to activate them and they
may not be activated.
Turning power ON/OFF
Turning power ON
1
Press [Power/Screen lock key] for 2 seconds or longer
• The starting screen appears, and then the lock screen appears.
• When you turn the power on for the first time, make the initial
settings following to the onscreen instructions (P.36).
2
■ Checking the radio wave condition
An icon indicating radio wave reception level appears on the status bar
(P.38).
When appears, you are out of LTE/FOMA service area or in a place
where the radio wave cannot reach.
Turning power OFF
1
Press [Power/Screen lock key] for 1 second or longer
2
"Power off" → "Power off"
• The terminal vibrates and power turns off.
Setting/Canceling screen lock
You can set the screen lock to prevent the erroneous operation of the
touch screen or keys.
• When the display is turned off with "Screen timeout" (P.109) set, the
screen lock activates automatically after about 5 seconds.
Setting screen lock
1
Press [Power/Screen lock key]
• The display turns off and the screen lock is set.
Canceling screen lock
1
During the screen lock, press
• Lock screen appears.
2
27
[Power/Screen lock key]
Before using the terminal