Table of Contents
Advertisement
Installing/Removing a microSD card
• The included SIM ejector tool (sample) is required to install/remove a
microSD card.
• Turn off the terminal before installing/removing a microSD card.
Installing microSD card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Place the IC (metallic) surface of the microSD card down on
the docomo nano UIM card/microSD card tray
4
Insert the docomo nano UIM card/microSD card tray into
the terminal
• Take care to insert the docomo nano UIM card/microSD memory
tray in the correct direction. If the direction you insert the docomo
nano UIM card/microSD card tray is incorrect, it may be damaged.
24
Before using the terminal
Advertisement
Table of Contents
