Samsung Galaxy Feel2 Instruction Manual page 27

Removing microSD card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally (P.24)
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Remove the microSD card from the docomo nano UIM card/
microSD card tray
4
Insert the docomo nano UIM card/microSD card tray into
the terminal
• Take care to insert the docomo nano UIM card/microSD memory
tray in the correct direction. If the direction you insert the docomo
nano UIM card/microSD card tray is incorrect, it may be damaged.
Information
• If you lost the SIM ejector tool, you can use a paper clip instead.
Example of a paper clip
Formatting microSD card
Note that formatting microSD card erases all data in the microSD card.
1
From the Home screen, "apps folder" → "Settings" → "Device
maintenance"
2
"Storage" → → "Storage settings"
3
"SD card" → "Format" → "FORMAT" → "DONE"
25
Before using the terminal