Table of Contents
Advertisement
Item
Other
Usage data access
security
settings
Notification access
Do not disturb
permission
*1
To erase installed certificate, tap "Clear credentials" to erase it
from credential storage. Operation of "Clear credentials" erases all
certificate in the credential storage.
*2
The display may differ depending on "Screen lock type" (P.113).
Description
Set the apps whether or not to allow the
terminal's usage histories to be read.
Set whether to allow apps to read
notifications.
Display which apps have permissions to
change the "Do not disturb" settings.
Security codes used on the terminal
Some functions provided for convenient use of the terminal require the
security code to use them. Besides a password for screen lock of the
terminal, a network security code necessary for the network services etc.
is available. Make use of the terminal using an appropriate security code
according to the purpose.
• Entered PIN/password for screen lock, network security code, PIN code
and PUK code are shown as " ● ".
■
Notes on the security codes
• Avoid using a number that is easy to guess, such as "birth date", "part of
your phone number", "street address number or room number", "1111", and
"1234". Make a note of the security code you set, etc. in case you should
forget it.
• Be careful never to reveal your security code to others. If a security code
is misused by others, DOCOMO assumes no responsibility for damages
resulted from it.
• If you forget your security codes, you need to bring a document (a driver's
license etc.) to identify your subscription, the terminal and the docomo
nano UIM card to a docomo Shop. For details, contact the "docomo
Information Center" on the last page of this manual.
• The PUK code is written on the subscription form (copy for customer)
handed at the subscription in the docomo Shop. If you have subscribed at
other than docomo Shop, you should bring your official identification (such
as driver's license), the docomo nano UIM card with you to the nearest
docomo Shop or contact "docomo Information Center" on the last page of
this manual.
■ PIN/password for screen lock
The security code is used for lock function of the terminal.
■ Network security code
The network security code is a 4-digit number necessary for
identification or using the docomo Network Services or " お客様サポー ト
(Customer support)" at reception of your request in docomo Shop or at
docomo Information Center. It can be set any number at the subscription
and also changed later by yourself.
For details of network security code, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/support/trouble/password/network/ (In
Japanese only)
115
Settings
Advertisement
Table of Contents
