Samsung Galaxy Feel2 Instruction Manual page 104

■ Managing network
Display saved networks.
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
→ "Advanced"
3
"Manage networks"
■ Connecting to Wi-Fi access point compatible with Hotspot 2.0
automatically
Set whether to automatically connect to Wi-Fi access point compatible
with Hotspot 2.0 within the area without setting the Wi-Fi access point.
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
→ "Advanced"
3
"VIEW MORE" → "Hotspot 2.0"
■ Installing a network certificate
Install a network certificate.
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
→ "Advanced"
3
"VIEW MORE" → "Install network certificates"
■ Using static IP address
You can set the terminal to connect to Wi-Fi network using the static IP
address.
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
Tap Wi-Fi network to connect → Mark "Show advanced
options"
3
Tap "IP settings" field → "Static"
4
Set required items
• For using static IP address, enter the following items.
- IP address
- Gateway
- Network prefix length
- DNS 1/DNS 2
• When setting proxy is required, select "Manual"/"Auto-config" and
follow the onscreen instructions.
5
"CONNECT"
■ Using Wi-Fi Direct
You can exchange data by connecting Wi-Fi Direct compatible devices.
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
"Wi-Fi Direct"
3
Tap a detected device name
• When the connection is accepted on the searched device, the
terminal will be connected via Wi-Fi Direct and
status bar.
■ Disconnecting Wi-Fi Direct
1
From the Home screen, "apps folder" → "Settings" →
"Connections" → "Wi-Fi"
2
"Wi-Fi Direct"
3
Tap a device name to disconnect
102
appears on the
Settings