Samsung Galaxy Feel2 Instruction Manual page 17

docomo nano UIM card
■ Do not put excessive force on the docomo nano UIM card when
inserting into or removing from the terminal.
■ Note that DOCOMO assumes no responsibility for malfunctions
occurring as the result of inserting and using a docomo nano UIM
card with other IC card reader/writer.
■ Clean the IC part occasionally and use it in a clean state.
If the IC is dirty, it may not be used properly.
■ Clean docomo nano UIM with a soft, dry cloth (such as a cloth for
eyeglasses).
■ Be sure to back up the data you saved in the docomo nano UIM
card on a microSD card, PC or cloud service, or keep a separate
note.
If registered data is deleted, DOCOMO assumes no responsibility for the
loss of any data.
■ Take an expended docomo nano UIM card to a sales outlet such
as a docomo Shop for proper disposal in order to protect the
environment.
■ Take care not to scratch, touch accidentally or short IC.
May cause data loss or malfunction.
■ Do not drop a docomo nano UIM card or subject it to impact.
May cause malfunction.
■ Do not bend a docomo nano UIM card or place a heavy object on
it.
May cause malfunction.
■ Do not install docomo nano UIM card into the terminal with a label
or sticker put on.
May cause malfunction.
Bluetooth function
■ The terminal is equipped with the security features, that are
compliant with Bluetooth standards for communication via
Bluetooth. However, depending on the settings, there may not be
enough security. Be aware of security risks when using Bluetooth.
■ DOCOMO assumes no responsibility for any information which
may be leaked during communication via Bluetooth.
⿟ Frequency bands
The frequency band used by the terminal's Bluetooth function/Wi-Fi
function is storage section is as follows.
2.4 FH1 / DS4 / OF4 / XX8
2.4 : This radio equipment uses the 2400 MHz band.
FH/DS/OF/ : Modulation scheme is FH-SS, DS-SS, OFDM or other
XX scheme.
1 : The estimated interference distance is 10 m or less.
4 : The estimated interference distance is 40 m or less.
8 : The estimated interference distance is 80 m or less.
: The full band between 2400 MHz and 2483.5 MHz
is used and the band of the mobile identification
device is unavoidable.
Available channels vary by the country.
For use in an aircraft, contact the airline company beforehand.
⿟ Cautions on using Bluetooth devices
In the bandwidth used by the terminal, in addition to home electric
appliances such as a microwave oven and industrial/scientific/medical
devices, in-plant radio stations used to identify mobile objects used in
production lines of a factory that require a license, specified low power
radio stations, or amateur radio stations that do not require a license
(hereafter "other radio stations") can be in operation.
1. Before using the terminal, confirm that "another station" is not being
operated nearby.
2. In the event of the terminal causing harmful radio wave interference
with "another station", promptly change the operating frequency or
stop radio wave emission by turning off the power, etc.
3. If you have further questions, contact "docomo Information Center"
provided on the last page of this manual.
15
Contents/Precautions