Samsung Galaxy Feel2 Instruction Manual page 24

2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Place the IC surface of the docomo nano UIM card down on
the docomo nano UIM card/microSD card tray
• Fit the docomo nano UIM card securely into the tray or it may come
off when you try to insert it into the slot.
4
Insert the docomo nano UIM card/microSD card tray into
the terminal
• Take care to insert the docomo nano UIM card/microSD memory
tray in the correct direction. If the direction you insert the docomo
nano UIM card/microSD card tray is incorrect, it may be damaged.
Notch
IC
22
Removing docomo nano UIM card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally (P.21)
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Remove the docomo nano UIM card/microSD card from the
docomo nano UIM card/microSD card tray
Before using the terminal