Electrical Requirements - Jackson Conserver XL-E Series Installation, Operation And Service Manual

SPECIFICATIONS
All electrical ratings provided in this manual are for reference only. Always refer to the machine data plate to get exact
electrical information for this machine. All electrical work performed on machines should be done in accordance with
applicable local, state, territorial, and national codes. Work should only be performed by qualified electricians and
authorized service agents.
Note that all electrical wiring used in this series of machines must be rated, at a minimum, for 212 °F (100 °C), and that only
copper conductors must be used.
Available Electrical Characteristics:
Conserver XL-E/XL-E-FL/XL HH
Electrical Characteristics
VOLTS
PHASE
FREQ
WASH
MOTOR 10.0 A
AMPS
TOTAL
10.0 A
LOAD
07610-003-92-84-T
115 208
1 1
60 60
5.0 A
5.0 A

ELECTRICAL REQUIREMENTS

NOTICE
i
Conserver XL-E-LTH
Electrical Characteristics
VOLTS 208
PHASE
1
FREQ 60
WASH
MOTOR 5.0 A
AMPS
RINSE
HEATER 43.3 A 47.8 A
AMPS
TOTAL
48.3 A 52.8 A
LOAD
230 208 230
1 3 3
60 60 60
5.0 A 5.0 A 5.0 A
25.0 A 27.7 A
30.0 A 32.7 A
7