Table of Contents
Advertisement
Adjusting the
Motion-Control
Neutral-Lock Pivot
You can adjust the flanged nut to obtain the desired
motion-control lever resistance when moving it to
the N
-L
position. See
EUTRAL
OCK
adjustment options.
1.
Loosen the jam nut.
2.
Tighten or loosen the flanged nut to the desired
feel.
•
For more resistance, tighten the flanged nut.
•
For less resistance, loosen the flanged nut
3.
Tighten the jam nut.
Figure 109
1. Flanged nut
Figure 109
for
g008621
2. Jam nut
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Hydraulic-Fluid
Specifications
Hydraulic-Fluid Type: Toro
hydraulic fluid or Mobil
Important:
Use the specified fluid. Other fluids
could damage the hydraulic system.
Each Hydraulic-System Fluid Capacity: 1.5 L (52 fl
oz) per side with filter change
Checking the Hydraulic
Fluid
Service Interval: Every 50 hours—Check the
hydraulic-fluid level.
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Allow the engine and the hydraulic system to
cool for 10 minutes.
Note:
The oil level on the dipstick is incorrect
when the oil is checked and the machine is hot.
4.
Move the seat forward.
5.
Clean the area around the dipsticks of
hydraulic-system reservoirs
6.
Remove 1 dipstick from the hydraulic reservoir
(Figure
110).
73
®
HYPR-OIL
™
500
®
1 15W-50.
(Figure
110).
Advertisement
Table of Contents
