Table of Contents
Advertisement
Collective presetting of stations
AUTO MEMORY ............ For the U.K. and Europe
AUTO PRESET .................... For other countries
Main unit only
1
Receive a broadcast.
TUNER
FM/AM
2
Select "AUTO MEMORY"
(or "AUTO PRESET").
menu
\
\
Channel space setting
The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
Main unit only
1
Turn power on.
2
While holding TUNER FM/AM key pressed,
turn the volume/multi control knob to se-
lect "FM 50/AM 9" or "FM100/AM10".
TUNER
FM/AM
3
Set it.
set / demo
volume / multi control
set / demo
\
\
(Except for U.K., Europe, Malaysia and Australia)
volume / multi control
A U T O M E M O R Y
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use "One-by-one pre-
setting (Manual preset)".
Each press switches the space frequency alter-
nately.
1 FM 50 kHz, AM 9 kHz
F M 5 0 / A M 9
2 FM 100 kHz, AM 10 kHz
F M 1 0 0 / A M 1 0
Area
USA, Canada and South
1
American countries
2
Other countries
Receiving broadcast station
Playback of tape
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
25
Advertisement
Table of Contents
