Table of Contents
Advertisement
64
Selecting characters using the 4 or ¢ key (Skip key mode)
If "Aa" or "12" is displayed, press the 4 or
¢ key.
1
Press the CHARAC. key repeatedly to select
a character group.
2
Press the 4 or ¢ key to move the selec-
tion cursor on the desired character.
4
3
Press the SET key to set the character.
(Repeat steps 1 to 3 for each character to be
entered.)
Selecting characters using the 4 / ¢ keys (Skip key mode)
Uppercase alphabet group
Lowercase alphabet group
Numeral and symbol group
Title group
÷ In the "Skip key mode" for character entry, a title memo or the title of another disc/track can be copied and entered in the
same way as the entry of alphabet characters.
CHARAC.
P.CALL
¢
SET
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
[123] [dISC] [001] [002] . . .
Á¨
The character group which can be used in the "skip
key mode" are as follows.
Uppercase alphabet group :
A to Z and space (1 blank character)
Lowercase alphabet group :
a to z and space
Numeral and symbol group :
0 to 9, space and symbols
Title group :
Title memos ([123]), disc title and track titles
÷ Holding the 4 or ¢ key scrolls the display so any
character in the same character group can be selected.
÷ Press the 1 or ¡ key to move the input location
(cursor) to the left or right.
÷ If you commit a mistake, press the CLEAR/DELETE
key to clear the character.
Example with an MD title
P a r
space
space
! " # $ % & ' ( ) * + , - . / : ; < = > ` ? @ ^ _
MD Edit Functions
≤ r s t u
The cursor moves and waits for
input of the next character.
space
Continued on next page
Advertisement
Table of Contents
