Table of Contents
Advertisement
66
Entering characters in Title Memo
To save labor required for character input, up to three frequently-used sets of characters can be stored
in title memo "[ 1 ]", "[ 2 ]" and "[ 3 ]".
Before starting MD editing, be sure to cancel the program mode by pressing the PGM key in stop mode.
Select the MD input.
1
Select the title memo number to be used as the entry destination.
1
Press the TITLE INPUT key so that
"MD - EDIT" blinks.
TITLE INPUT
2
Press the 4 or ¢ key repeatedly to
select the entry destination, which may
be title memo "[ 1 ]", "[ 2 ]" or "[ 3 ]".
3
Press the SET key.
2
Input the characters.
See step 2 in "Assigning a title to a disc or
track". „
3
Execute title entry.
1
Press the ENTER key to store the characters
in title memo.
2
To exit from editing, press the TITLE IN-
PUT key.
TITLE INPUT
ENTER
(TITLE MEMO)
Each press of the 4 or ¢ keys switches the op-
eration.
1 "dISC" :
Disc title *1
2 "001", "002"..... :
3 "ALL ERASE"
4 "[ 1 ]", "[ 2 ]", "[ 3 ]" :
*1 When step 1-1 is performed in stop mode, the dis-
play starts with the disc title.
*2 When step 1-1 is performed in play mode, the display
begins with the information on the track being played.
Title memo No.
÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
÷ To cancel the operation in the middle, press the
TITLE INPUT key any time before step
÷ A disc title (Mini Disc name) or track title can also be cop-
ied in title memo "[ 1 ]", "[ 2 ]" or "[ 3 ]".
÷ To continue character input in other title memo, repeat
steps 1 - 2 and 2 for each set of characters.
MD Edit Functions
Track title *2
Title Memo
3 - 1
.
¨
Advertisement
Table of Contents
