Moving A Single Track (Move) - Kenwood HM-383MD Instruction Manual

54
Moving a single track
The following procedure shows you how to select a single tracks (track number) and move (insert) it at the
desired destination position in the series of track numbers. After the tracks have been moved, the track
numbers before and after them will be adjusted automatically. By repeating this operation, you can reor-
der the tracks in the desired order.
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Execute operation in play or pause mode.
1
Select " 3 MOVE ? ".
1
Press the TRACK EDIT key repeatedly until
"3 MOVE?" is selected. (Pressing the key in
the middle of playback initiates pause.)
TRACK EDIT
2
Set it.
2
Select the moving destination track.
1
Select a track number.
To decrease
track No.
4
2
Set it.
(MOVE)
SET
To increase
track No.
P.CALL
¢
SET
Each press switches the operation.
1 "3 DIVIDE
?"
2 "3 COMBINE ?"
3 "3 ERASE
?"
4 "3 MOVE
?"
5 The "MD-EDIT" indicator is turned off
(Cancel MD edit mode)
M O V E
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
The displayed number of tracks is always "1".
0 0 6 / 1 / 0 0 7
MD Edit Functions
?
3
.
Destination track No.