Table of Contents
Advertisement
Special features
MD Long Play modes
With the long-hour recording/playback modes (LP2, LP4) based on ATRAC3 (MDLP), digital long-hour re-
cording/playback for twice (about 160 minutes*) or 4 times (about 320 minutes*) the normal recording/
playback time is now available. (* Data using a 80-minute disc.)
CD = MD high-speed dubbing
This convenient feature enables simple, quick dubbing from a CD to an MD (either single track or all
tracks in a CD).
Convenient recording features
Versatile recording features are provided, allowing the user to select desired one for each purpose.
÷
One-touch recording
Pressing a single key starts recording of all tracks or a single track in a CD.
÷
:
TWIN recording
Simultaneous recording of CD playback onto both MD and tape.
÷
:
Program recording
Your favorite tracks can be recorded in any desired order.
Versatile timer features
÷ O.T.T. (Operate easy To use Timer) :
This timer setting is executed only for an hour (and for once) when the set start time comes.
÷ Timer playback, timer recording :
Two timer programs (PROG.1, PROG.2) are available for timer playback (AI timer playback) or timer recording.
(With the AI timer playback, the playback volume increases gradually after the start of timer playback.)
÷ Sleep timer :
This timer turns the unit off automatically when the set time has elapsed. It is convenient for example for
falling asleep while listening to music in the night time, etc.
In regard to demonstration
This unit is equipped with a demonstration function (only display). The demonstration consists of se-
quential change of display and indicators showing the operations, but the audio itself does not change.
The demonstration function can be cancelled as follows.
"DEMO OFF" (To cancel demonstration):
Press the set/demo key during demonstration.
set / demo
"DEMO ON" (To execute demonstration):
After turning power ON, press and hold the set/
demo key (for more than 2 seconds).
:
÷ This operates automatically when a power failure
has occurred or the plug of the power cable has
been pulled while the power was ON.
3
Before applying power
Advertisement
Table of Contents
